Skip to content
Illustration of a Gulfstream G280. Not a photo of N198HF.
Illustration of the Gulfstream G280, not a photo of N198HF.

N198HF 2019 Gulfstream G280

Serial number 2176. Registered to Hormel Foods Corporate Services LLC, Austin, MN, US.

  • 2019Built
  • 10Seats
  • 3,600 nmRange
  • 482 ktCruise
  • 45,000 ftCeiling

INSIDE

The Gulfstream G280 cabin.

Illustrations of a typical Gulfstream G280 cabin, not N198HF’s. Every aircraft’s completion differs.

Warm natural light fills a Gulfstream G280 cabin viewed aft along its dropped aisle, with cream leather club seats, a three-place divan, upright rounded windows and polished wood veneer.
A typical Gulfstream G280 cabin.
Top-down view of a Gulfstream G280 cabin. Typical 9-passenger layout: a club of four, two facing club seats opposite a three-place divan, forward galley, aft lavatory and baggage.
Typical 9-passenger layout: a club of four, two facing club seats opposite a three-place divan, forward galley, aft lavatory and baggage.

SPECIFICATIONS

Gulfstream G280 specs

Published figures for the type, from public sources. A given aircraft varies with its completion, weight and mods.

Model
Gulfstream G280
Year
2019
Serial number
2176
Engines
2 × Honeywell HTF7250G (AS907-2-1G)
Thrust
7,624 lbf each
Seats
Up to 10
Range
3,600 nm
Cruise
482 ktas
Published Mach
0.85
Ceiling
45,000 ft
Fuel capacity
2,182 US gal
ICAO type
G280

THE AIRCRAFT’S LIFE

N198HF on the registry.

Registration events from FAA records, compiled August 2026. Maintenance, damage and component history live in the logbooks, not the registry.

  1. Registry record

    Airworthiness date on the current FAA record (standard category).

    FAA registry
  2. Hormel Foods Corporate Services LLC

    Certificate of registration issued as N198HF.

    FAA registry

FAA REGISTRATION

Registration details

Registration
N198HF
Status
Current as of August 2026
Certificate issued
Sep 10, 2019
Airworthiness date
Apr 11, 2019
Last FAA action
Sep 2, 2023
Registration expires
Sep 30, 2029
Mode S code (hex)
A18698
Aircraft category
Super-midsize jet
Weight class
Over 20,000lbs

From FAA registry data as of August 2026. Check the FAA registry for the current record.

OWNERSHIP

Registered owner

Hormel Foods Corporate Services LLC

LLC · Austin, MN, US

ESTIMATED VALUE

What N198HF might be worth

No estimate on record

Value depends on total time, engine program, damage history and the completeness of the logbooks.

Open the aircraft value tool

EQUIPMENT AND HISTORY

As reported in public sources

Avionics
Gulfstream PlaneView280 (standard on the type)
Cabin
Type cabin: 73 in high, 83 in wide, 25.83 ft long, with 120 cu ft of baggage space.

Listings and registries are not the logbooks. A pre-buy confirms equipment, program status and damage history from the records themselves.

RESEARCH NOTES

About N198HF

Compiled with AI assistance from the public sources listed below, August 2026. Not checked against the aircraft's logbooks.

Aircraft and registrant Hormel Foods Corporate Services LLC of Austin, MN is the registrant of N198HF, a 2019 Gulfstream G280 with serial number 2176. In the FAA data the registrant type is LLC.

Registry details Under type certificate FAA TCDS A61NM, the FAA record shows Gulfstream G280 as the model, with IAI Ltd as the make. The certificate of registration carries an issue date of September 10, 2019, and the airworthiness date is April 11, 2019.

G280 figures The G280, a super-midsize jet, carries up to 10 passengers. Its published range is 3,600 nm (NBAA IFR theoretical range at Mach 0.80, 4 passengers and 2 crew), and its maximum cruise speed is 482 ktas. The ceiling is 45,000 ft. Honeywell HTF7250G engines of 7,624 lbf each power the type, and the standard flight deck is Gulfstream PlaneView280. The type's cabin is 73 in high, 83 in wide and 25.83 ft long.

SOURCES

Where this page comes from

Built from FAA registry records, manufacturer specifications, and public flight-tracking and market data, compiled August 2026. Values come from Radar’s aircraft value model. Owners and operators can ask for a correction or removal.

BUYING, SELLING OR FINANCING

What to check before a deal