Bombardier Challenger 601-3A interior cabin size, seat map and 3D tour
The Bombardier Challenger 601-3A cabin is 28 ft 4 in long, 8 ft 2 in wide and 6 ft 1 in high, tall enough to stand up in. It is published for up to 19 passengers; a typical completion seats 9, with forward galley and aft lavatory.
- Cabin length
- 28 ft 4 in
- Cabin width
- 8 ft 2 in
- Cabin height
- 6 ft 1 in
- Stand-up cabin
- Yes
- Passengers
- 9 typical, up to 19
- Seating areas
- 2
- Galley
- Forward galley
- Lavatory
- Aft lavatory
SEAT MAP AND LAYOUT
The Challenger 601-3A seat maps.
From the front, a representative Challenger 601-3A cabin has a club of four facing seats and a club of four facing seats. Galley forward and lavatory aft is the usual plan; owners choose seats, divans and monuments when the aircraft is completed.
COMPARED, TO SCALE
Challenger 601-3A cabin vs Citation X, Citation Longitude and G200
Published cabin height, width and length, drawn on one scale with a 6 ft person. Large-cabin jets compared on every private jet interior.
- Bombardier Challenger 601-3A 6 ft 1 in high, 8 ft 2 in wide, 28 ft 4 in long, up to 19 passengers
- Cessna Citation X interior 5 ft 8 in high, 5 ft 6 in wide, 25 ft 2 in long, up to 12 passengers
- Cessna Citation Longitude interior 6 ft high, 6 ft 5 in wide, 25 ft 2 in long, up to 12 passengers
- Gulfstream G200 interior 6 ft 3 in high, 7 ft 2 in wide, 24 ft 5 in long, up to 10 passengers
QUESTIONS
Challenger 601-3A interior questions
More on the type: Bombardier Challenger 601-3A price, specs, range and every tail number, large-cabin jets compared, private jet interiors by class.
How big is the Challenger 601-3A cabin?
28 ft 4 in long, 8 ft 2 in wide and 6 ft 1 in high, as the manufacturer publishes it. Cabin length is usually measured from the cockpit divider to the aft pressure bulkhead or baggage door, so it includes the galley and lavatory.
Can you stand up in a Challenger 601-3A?
Yes. At 6 ft 1 in the Challenger 601-3A cabin is 1 in above 6 ft, so most adults can stand and walk the aisle upright. The floor is 8 ft 2 in wide at its widest.
How many seats does a Challenger 601-3A have?
The Challenger 601-3A is published for up to 19 passengers. A typical executive completion seats 9, arranged as a club of four facing seats and a club of four facing seats. Owners choose their own completion, so a given aircraft may seat fewer in larger seats or carry a divan that converts to a bed.
Does the Challenger 601-3A have a bathroom?
Yes. The typical layout has aft lavatory and a forward galley.
What does the Challenger 601-3A seat map look like?
Typical 9-passenger layout: a club of four, two club seats opposite a three-place divan, forward galley, aft lavatory. This page shows 2 seat maps: switch between them above the comparison. Every aircraft is completed to its owner's order, so these are representative layouts, not any one aircraft's.
How does the Challenger 601-3A cabin compare with the Citation X?
The Challenger 601-3A cabin is 32 in wider than the Citation X's, 5 in taller and 3 ft 2 in longer (6 ft 1 in high, 8 ft 2 in wide, 28 ft 4 in long against 5 ft 8 in, 5 ft 6 in, 25 ft 2 in).
Is the 3D Challenger 601-3A cabin the real interior?
It is Radar's illustration of the type, built from the published cabin length, width and height with a representative 8-seat layout for its size. Seats, materials and monuments differ from aircraft to aircraft. No manufacturer artwork, photographs or logos are used.
Operate a Challenger 601-3A? Put its logbooks in Radar.
Radar reads every logbook page, typed or handwritten, and builds one searchable record per tail: times, inspections, ADs and components, each tied to the page it came from.