Airworthiness Directive Lookup Free FAA AD search by N-number, make or model
Find the FAA airworthiness directives that may apply to an aircraft: 12,857 ADs from the Federal Register since 1995, through Oct 1, 2026, each with its applicability text and the official document. Free, no account.
N20KG is a 1986 Socata TB 10 in the FAA registry (aircraft page). Matched on type certificate model TB 10.
RESULTS
11 ADs in effect may apply to N20KG
- In effect11
- Recurring5
- Superseded or removed0
Informational only. These are FAA airworthiness directives whose published applicability names this make and model. Whether an AD applies to a particular aircraft depends on its serial number, installed engines, propellers, parts and modifications, and some ADs listed here will not apply. This list is not the official AD record and not a compliance determination: confirm applicability and compliance against the FAA’s Dynamic Regulatory System and the aircraft’s records with a certificated mechanic or inspector. Covers ADs published in the Federal Register since 1995, through Oct 1, 2026; older ADs, and engine, propeller and appliance ADs that do not name the aircraft, are not included.
- AD 2018-21-06 Recurring
SOCATA Airplanes
This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product.
Applicability, as the AD words it
This AD applies to SOCATA airplanes listed in the following groups, certificated in any category: (1) Group 1 airplanes: Model TB 9, all manufacturer serial numbers (MSN); and Model TB 10, MSN 001 through 803, 805, 806, 809 through 815, and 820 through 822; and (2) Group 2 airplanes: Model TB 10, MSN 804, 807, 808, 816 through 819, and 823 through 2229; and Model TB 200, all MSNs.
- AD 2015-24-03 Recurring
SOCATA Airplanes
This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product.
Applicability, as the AD words it
This AD applies to SOCATA Models TB 9, TB 10, TB 20, TB 21, and TB 200 airplanes, all manufacturer serial numbers, certificated in any category.
- AD 2007-13-18 One-time
SOCATA-Groupe Aerospatiale Models TB9, TB10, and TB200 Airplanes
Applicability, as the AD words it
This AD applies to Models TB 9, TB 10, and TB 200 airplanes, all serial numbers, certificated in any category.
- AD 2006-03-08 One-time Appliance
Aero Advantage ADV200 Series (Part Numbers ADV211CC and ADV212CW) Vacuum Pumps
Applicability, as the AD words it
This AD affects ADV200 series (part numbers (P/Ns) ADV211CC and ADV212CW) vacuum pumps installed on, but not limited to, the following aircraft that are certificated in any category. These vacuum pumps can be installed under supplemental type certificate number SA10126SC, through field approval, or other methods: Make Model Alexandria Aircraft, LLC: 14-19, 14-19-2, 14-19-3, 17-30, 17-31, 17-31TC, 17-30A, 17-31A, and 17- 31ATC. Alliance Aircraft Group, LLC: H-295 (USAF U10D). American Champion Aircraft Corp: 7AC, 7ECA, 7GC, 7GCA, 7GCAA, 7GCB, 7GCBC, 7HC, 7KC, 7KCAB, 8GCBC, and 8KCAB. Cessna Aircraft Company, The: 172, 172A, 172B, 172C, 172D, 172E, 172F, 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P, 172Q, 182, 182A, 182B, 182C, 182D, 182E, 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R, R182, T182, TR182, 172RG, R172E, R172F, R172H, R172J, 152, A152, 210, 210-5 (205), 210-5A (205A), 210A, 210B, 210C, 210D, 210E, 210F, 210G, 210H, 210J, 210K, 210L, 210M, 210N, P210N, T210G, T210H, T210M, T210N, T210R, 185, 185A, 185B, 185C, 185D, 185E, 180, 180A, 180B, 180C, 180D, 180E, 180F, 180G, 180H, 180J, 120, 140, 170, 170A, 170B, 177, 177A, 177B, 207, 207A, T207, T207A, 177RG, 206, P206, P206A, P206B, P206C, P206D, P206E, TP206A, TP206B, TP206C, TP206D, TP206E, TU206A, TU206B, TU206C, TU206D, TU206E, TU206F, TU206G, U206, U206A, U206B, U206C, U206D, U206E, U206F, U206G, 188, 188A, 188B, A188, A188A, and A188B. Commander Aircraft Company: 112, 112B, 112TC, 114, and 114A. Dynac Aerospace Corporation: Aero Commander 100. Global Amphibians, LLC: Lake LA-4-200, Lake Model 250. Maule Aerospace Technology, Inc: M-4-210, M-4-220, M-5-180C, M-5-200, M- 5-235C, M-6-180, and M-6-235. Mooney Aircraft Corporation: M20, M20A, M20B, M20C, M20D, M20E, M20F, M20G, M20J, M20K, M20M, and M22. Navion Aircraft Company, Ltd: Navion G and Navion H. Piper Aircraft, Inc., The New: PA-23, PA-23-160, PA-23-235, PA-23-250 (Navy UO-1), PA-E23-250, PA-24, PA-24- 250, PA-24-260, PA-18, PA-18-105 (Special), PA-18-135, PA-18-150, PA- 20-115, PA-20-135, PA-22-108, PA-22- 135, PA-22-150, PA-22-160, PA-25, PA- 25-235, PA-25-260, PA-28-140, PA-28- 150, PA-28-151, PA-28-160, PA-28-161, PA-28-180, PA-28-181, PA-28-201T, PA- 28-235, PA-28-236, PA-28R-180, PA-28R- 200, PA-28R-201, PA-28R-201T, PA-28RT- 201, PA-28RT-201T, PA-25, PA-25-235, PA-25-260, J5A-80, J5A (Army L-4F), J5B (Army L-4G), J5C, PA-12, PA-36- 285, PA-36-300, PA-36-375, PA-38-112, PA-30, PA-39, PA-40, PA-31, PA-31- 300, PA-31-325, PA-31-350, PA-32-260, PA-32-300, PA-32-301, PA-32-301T, PA- 32R-300, PA-32R-301 (HP), PA-32R- 301T, PA-32RT-300T, PA-31P, and PA-36- 300. Raytheon Aircraft Company: 35-33, 35-A33, 35-B33, 35-C33, 35- C33A, 36, A36, A36TC, B36TC, E33, E33A, E33C, F33, F33A, F33C, G33, H35, J35, V35, V35A, V35B, D45 (Military T-34B), 35, 35R, A35, B35, C35, D35, E35, F35, G35, 19A, 23, A23, A23A, A24, A24R, B19, B23, B24R, C23, and C24R. Rogers, Burl A: 15AC and S15AC. SOCATA--Groupe Aerospatiale: MS 885, MS 892A-150, MS 892E-150, MS 893A, MS 893E, Rallye 150 ST, Rallye 150 T, TB 10, TB 20, and TB 9 Tiger Aircraft LLC: AA-1, AA-1A, AA-1B, AA-1C, AA-5, AA- 5A, and AA-5B.
- AD 2003-26-06 Recurring Appliance
Anjou Aeronautique Safety Belts and Restraint Systems
Applicability, as the AD words it
This AD affects Anjou Aeronautique safety belts and restraint systems specified in paragraph (c)(1) that are installed on, but not limited to, the aircraft specified in paragraph (c)(2) that are certificated in any category: (1) Anjou Aeronautique safety belts and restraint systems: Part Numbers/Types 343, 343-1, 343AM, 343B, 343BM, 343C, 343CM, 343D, and 343M. (2) Affected aircraft: The following is a list of aircraft that may incorporate the affected Anjou Aeronautique safety belts and restraint systems: (i) EUROCOPTER FRANCE Models AS332C, AS332L, AS332L1, AS332L2, and AS350B2 helicopters; and (ii) SOCATA--Groupe AEROSPATIALE TB 9, TB 10, TB 20, TB 21, TB 200, TMB 700, Rallye 100S, Rallye 150T, Rallye 150ST, Rallye 235E, and Rallye 235C airplanes.
- AD 2003-04-03 Recurring
SOCATA-Groupe AEROSPATIALE Models TB 9, TB 10, TB 20, TB 21, and TB 200 Airplanes
Applicability, as the AD words it
This AD applies to each airplane identified in paragraph (a) of this AD, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/ operator must request approval for an alternative method of compliance in accordance with paragraph (e) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if you have not eliminated the unsafe condition, specific actions you propose to address it. (f) Where can I get information about any already-approved alternative methods of compliance? Contact Karl Schletzbaum, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4146; facsimile: (816) 329-4090. (g) What if I need to fly the airplane to another location to comply with this AD? The FAA can issue a special flight permit under sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate your airplane to a location where you can accomplish the requirements of this AD. (h) Are any service bulletins incorporated into this AD by reference? Actions required by this AD must be done in accordance with Socata TB Aircraft Mandatory Service Bulletin SB 10-130 27, dated April 2002. The Director of the Federal Register approved this incorporation by reference under 5 U.S.C. 552(a) and 1 CFR part 51. You may get copies from SOCATA Groupe AEROSPATIALE, Customer Support, Aerodrome Tarbes-Ossun-Lourdes, BP 930--F65009 Tarbes Cedex, France; telephone: 011 33 5 62 41 73 00; facsimile: 011 33 5 62 41 76 54; or the Product Support Manager, SOCATA Groupe AEROSPATIALE, North Perry Airport, 7501 Pembroke Road, Pembroke Pines, Florida 33023; telephone: (954) 893-1400; facsimile: (954) 964-4141. You may view copies at the FAA, Central Region, Office of the Regional Counsel, 901 Locust, Room 506, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
- AD 2001-23-05 One-time
SOCATA-Groupe Aerospatiale Models TB 9, TB 10, TB 20, TB 21, and TB 200 Airplanes
Applicability, as the AD words it
This AD applies to each airplane identified in paragraph (a) of this AD, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/ operator must request approval for an alternative method of compliance in accordance with paragraph (e) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if you have not eliminated the unsafe condition, specific actions you propose to address it. (f) Where can I get information about any already-approved alternative methods of compliance? Contact Karl Schletzbaum, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4146; facsimile: (816) 329-4090. (g) What if I need to fly the airplane to another location to comply with this AD? The FAA can issue a special flight permit under sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate your airplane to a location where you can accomplish the requirements of this AD. (h) Are any service bulletins incorporated into this AD by reference? Actions required by this AD must be done in accordance with SOCATA Service Bulletin SB-10-115-25, dated December 2000. The Director of the Federal Register approved this incorporation by reference under 5 U.S.C. 552(a) and 1 CFR part 51. You can get copies from SOCATA Groupe AEROSPATIALE, Customer Support, Aerodrome Tarbes-Ossun-Lourdes, BP 930--F65009 Tarbes Cedex, France; or the Product Support Manager, SOCATA--Groupe AEROSPATIALE, North Perry Airport, 7501 Pembroke Road, Pembroke Pines, Florida 33023. You can look at copies at the FAA, Central Region, Office of the Regional Counsel, 901 Locust, Room 506, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC. (i) When does this amendment become effective? This amendment becomes effective on January 4, 2002.
- AD 2001-23-04 Recurring
SOCATA-Groupe Aerospatiale Models TB 9, TB 10, TB 20, TB 21, and TB 200 Airplanes
Applicability, as the AD words it
This AD applies to each airplane identified in paragraph (a) of this AD, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (e) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if you have not eliminated the unsafe condition, specific actions you propose to address it. (f) Where can I get information about any already-approved alternative methods of compliance? Contact Karl Schletzbaum, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4146; facsimile: (816) 329-4090. (g) What if I need to fly the airplane to another location to comply with this AD? The FAA can issue a special flight permit under sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate your airplane to a location where you can accomplish the requirements of this AD. (h) Are any service bulletins incorporated into this AD by reference? Actions required by this AD must be done in accordance with SOCATA Service Bulletin SB 10-114-55, dated September 2000. The Director of the Federal Register approved this incorporation by reference under 5 U.S.C. 552(a) and 1 CFR part 51. You can get copies from SOCATA Groupe Aerospatiale, Customer Support, Aerodrome Tarbes-Ossun-Lourdes, BP 930--F65009 Tarbes Cedex, France; or the Product Support Manager, SOCATA--Groupe Aerospatiale, North Perry Airport, 7501 Pembroke Road, Pembroke Pines, Florida 33023. You can look at copies at the FAA, Central Region, Office of the Regional Counsel, 901 Locust, Room 506, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC. (i) When does this amendment become effective? This amendment becomes effective on January 4, 2002.
- AD 98-08-21 One-time
SOCATA-Groupe AEROSPATIALE Models TB10 and TB200 Airplanes
To prevent structural failure of the wing rear attachment fittings caused by cracks in this area, which could result in the wing separating from the airplane if the airplane is operated with cracked wing rear attachment fittings over an extended period of time.
Applicability, as the AD words it
Models TB10 and TB200 airplanes, serial numbers 804; 807; 808; 816 through 819; 823 through 1701; 1707 through 1733; and 1737 through 1761, certificated in any category.
- AD 98-04-03 One-time
SOCATA-Groupe AEROSPATIALE Models TB9, TB10, TB20, TB21, and TB200 Airplanes
To prevent failure of the upper seat belt attachment caused by excessive loads on the upper attachment of the belt, which could result in bodily injury to the occupants during landing.
Applicability, as the AD words it
Models TB9, TB10, TB20, TB21, and TB200 airplanes, serial numbers 1 through 1701; 1707 to 1750; 1758 to 1763; 1767, 1768, and 1769, certificated in any category.
- AD 95-07-01 Engine
Textron Lycoming O-360, LO-360, HO-360, HIO-360, TIO-360, LIO-360, AEIO-360, O-540, IO-540, TIO-540, LTIO-540, IVO-540, AEIO-540, TIO-541, and IO-720 Series Reciprocating Engines
Applicability, as the AD words it
The following Textron Lycoming reciprocating engine models, assembled on or after February 15, 1994, and that contain connecting rod bolts shipped directly or indirectly from Superior Air Parts, Inc., on or after February 15, 1994: O-360-A1A, -A1AD, -A1C, -A1D, -A1F6, -A1F6D, -A1G6, - A1G6D, - A1LD, -A2A, -A2D, -A2E, -A2F, -A2G, -A3A, -A3AD, - A4A, -A4G, -A4J, -A4K, -A4M, -A4N, -A5AD, -B2A, -C1A, -C1C, -C1E, -C1F, -C1G, -C2A, - C2C, -C2D, -C2E, -D2A, -D2B, -F1A6; IO-360-A1A, -A1B, -A1B6, -A1B6D, -A1C, -A1D, -A1D6, -A2A, - A2B, -A3B6D, -B1A, -B1B, -B1D, -B1E, - B1F, -B2F, -B2F6, - B4A, -C1A, -C1B, -C1C6, -C1D6, -C1E6, -C1F, - J1A6D; AIO-360- A1A, -A1B, -B1B; LO-360-A1G6D; HO-360-B1A, -B1B; HIO-360- A1A, -B1A, -C1A, -C1B, -E1AD, -E1BD; LIO-360-C1E6; TIO-360- A1B; AEIO-360-A1E, -B1G6, -H1A; O-540-A1A, -A1A5, -A1B5, - A1C5, - A1D, -A1D5, -A2B, -A3D5, -B1A5, -B1B5, -B2B5, -B2C5, -B4B5, -E4A5, - E4B5, -E4C5, -F1A5, -F1B5, -G1A5, -G2A5, - H1B5D, -H2B5D, -J1A5D, - J3A5D, -J3C5D, -L3C5D; IO-540-A1A5, -B1A5, -B1C5, -C1B5, -C4B5, - C4C5, -C4D5D, -D4A5, -E1A5, - E1B5, -G1A5, -G1B5, -G1C5, -G1D5, - G1E5, -G1F5, -J4A5, - K1A5, -K1A5D, -K1B5, -K1C5, -K1D5, -K1E5, K1K5, -M1A5, - N1A5, -P1A5, -R1A5, -T4C5D -K1F5, -K1F5D, -K1G5, - K1G5D, - K1J5D, -K1K5, -M1QA5, -M1B5D, -N1A5, -P1A5, -R1A5, -S1A5, - T4A5D, -T4B5D, -T4CTD, -V4A5D, -W1A5D, -W3A5D, -AA1A5; TIO-540-A1A, -A1B, -A2A, -A2B, -A2C, -C1A, -E1A, -G1A, -H1A, -J2B, -F2BD, -J2BD, -N2BD, -R2AD, -S1AD, -AA1AD, -AB1AD; LTIO-540-J2B, -F2BD, -J2BD. - N2BD, -R2AD; IVO-540-A1A; AEIO- 540-D4B5; TIO-541-A1A, -E1A4, -E1B4, -E1C4; IO-720-A1A, - A1B, -B1B, -B1BD, -C1B, and -D1B. These engines are installed on but not limited to the following aircraft: Beech series 95, 23, 76, 60; Piper series PA-24, PA-44, PA- 28, PA-34, PA-23, PA-25, PA-32, PA-60, PA-31; Aero Commander (Intermountain, Callair, Aeronautical Agricola Mexicana, Twin Commander Aircraft Corp.) series A-6, A-9, 100, 500; Lake Aircraft Corporation (Consolidated Aero., Inc., REVO) series C-2, LA-4; Mooney Aircraft Corp. series M-20, M-22; Sud Aviation GY-180; Partenavia series P-68; Siai-Marchetti (Agusta S.p.A) series S.205, S.210, F.260, S.208; Procaer series F 15; SOCATA series TB10, MS- 893, 235, TB20, TB21; Cessna series 172, 177, 177RG, 182, TR182, 182RG; Teal Aircraft Corporation (Bohica) TWC-1; Avions Mudry et Cie CAP 10; Augustair (Montanair, Inc.) 2150; Grumman American (American General Aircraft Holding Co., Inc.) AA-5 series; Fuji Heavy Industries, Ltd. FA-200 series; Bellanca (American Champion Aircraft Corp.) Aircraft 8GCBC, 8KCAB; Maule Aerospace Technology Corp. series MX-7, M5, M-6; Christen A-1, (Pitts) S1T; Schweizer Aircraft Corp.(Hughes, McDonnell Douglas) 269A series; Rockwell (Commander Aircraft Company) series112, 114; Moravan ZLIN Z 242L; Slingsby Aviation Limited T67M; Enstrom F-28 series; Found Brothers Aviation Ltd. FBA-2C, FBA Centennial "100"; Dornier Luftfahrt GmbH DO-28 series; Spinks Industries, M.H. Spinks, Sr. Rawdon T-1; Pilatus Britten-Norman BN-2 series; Omega Aircraft Corporation BS-12D1; Robinson R-44 series; Aerostar Aircraft Corp. (Piper, Ted Smith); Brantly Helicopters Industries U.S.A. Co., Ltd.305; Pacific Aerospace Corp., Ltd. FU-24-954 series. Note: This AD applies to each engine identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For engines that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must use the authority provided in paragraph (g) to requiest approval from the FAA. This approval may address either no action, if the current configuration eliminates the unsafe condition, or different action necessary to address the unsafe condition described in this AD. Such a request should include an assessment of the effect of the changed configuration on the unsafe condition addressed by this AD. In no case does the presence of any modification, alteration, or repair remove any engine from the applicability of this AD.
Radar reads the logbooks and ties each AD to the entries that show how and when it was complied with, with recurring ADs due by date and hours.
QUESTIONS
AD lookup questions
Sources: FAA final rules under 14 CFR part 39, from the Federal Register; make and model from the FAA aircraft registry. The FAA’s Dynamic Regulatory System holds the official AD list.
What is an airworthiness directive (AD)?
An airworthiness directive is a legally enforceable rule the FAA issues under 14 CFR part 39 when it finds an unsafe condition in an aircraft, engine, propeller or appliance that is likely to exist in others of the same design. It says which products it applies to and what must be done, and by when: an inspection, a part replacement, a modification or a limitation. No one may operate a product to which an AD applies except in accordance with it.
How do I look up the ADs for my aircraft?
Type the N-number, or the make and model, into the box above. Radar finds the aircraft's make and model in the FAA registry and lists every AD published in the Federal Register whose applicability names it, newest first, with the AD's own applicability text and a link to the official document. The FAA's Dynamic Regulatory System (drs.faa.gov) holds the official list.
Does every AD in the results apply to my aircraft?
Not necessarily. An AD can be limited to serial number ranges, to aircraft with certain parts or modifications installed, or to a configuration. The results are ADs that may apply because they name the make and model. A certificated mechanic or inspector determines applicability against the aircraft's serial number and records, and records how each applicable AD was complied with.
What is the difference between a recurring and a one-time AD?
A one-time AD is complied with once, for example by replacing a part. A recurring (repetitive) AD requires an action again at an interval, such as an inspection every 100 hours or every 12 months, until a terminating action ends it. Radar marks an AD Recurring when its text requires repetitive actions; always read the AD for the intervals.
What does superseded mean?
When the FAA replaces an AD with a new one, the old AD is superseded: its requirements are carried into, or replaced by, the new AD. Results show the ADs in effect by default; superseded and removed ADs can be shown for the history.
Where does this data come from?
The Federal Register, where the FAA publishes every AD as a final rule. Radar reads each one from the Federal Register API (12,857 ADs since 1995) and refreshes the list every weekday. Make and model come from the FAA aircraft registry. ADs issued before 1995 are not in the Federal Register's online edition and are not included.
Are engine and propeller ADs included?
Only when their applicability names the aircraft. Most engine and propeller ADs name the engine or propeller model, so check those by the installed engine and propeller models. Appliance ADs that list the aircraft among those the appliance can be installed on are included and marked Appliance.
Know which ADs apply, and where each one was signed off.
Radar reads every logbook page, typed or handwritten, and builds one searchable record per tail: times, inspections, ADs and components, each tied to the page it came from.