Skip to content
Illustration of a Cessna Citation X. Not a photo of N751EM.
Illustration of the Cessna Citation X, not a photo of N751EM.

N751EM 2006 Cessna Citation X

Serial number 750-0254. Registered to Global Automation Solutions Inc, Marlborough, CT, US.

  • 2006Built
  • 12Seats
  • 2,890 nmRange
  • 525 ktCruise
  • 51,000 ftCeiling

INSIDE

The Cessna Citation X cabin.

Illustrations of a typical Cessna Citation X cabin, not N751EM’s. Every aircraft’s completion differs.

Warm natural light illuminates eight cream leather club seats and walnut trim in the compact, curved Citation X cabin, viewed at eye level looking aft along the narrow dropped aisle toward the lavatory door.
A typical Cessna Citation X cabin.
Top-down view of a Cessna Citation X cabin. Typical 8-passenger layout: two clubs of four, forward galley, aft lavatory and separate baggage hold.
Typical 8-passenger layout: two clubs of four, forward galley, aft lavatory and separate baggage hold.

SPECIFICATIONS

Cessna Citation X specs

Published figures for the type, from public sources. A given aircraft varies with its completion, weight and mods.

Model
Cessna Citation X
Year
2006
Serial number
750-0254
Engines
2 × Rolls-Royce AE3007C1
Thrust
6,764 lbf each
Seats
Up to 12
Range
2,890 nm
Cruise
525 ktas
Published Mach
0.92
Ceiling
51,000 ft
Fuel capacity
1,930 US gal
ICAO type
C750

THE AIRCRAFT’S LIFE

N751EM on the registry.

Registration events from FAA records, compiled August 2026. Maintenance, damage and component history live in the logbooks, not the registry.

  1. Registry record

    Airworthiness date on the current FAA record (standard category).

    FAA registry

  2. Global Automation Solutions Inc

    Certificate of registration issued as N751EM.

    FAA registry

FAA REGISTRATION

Registration details

Registration
N751EM
Status
Current as of August 2026
Certificate issued
Dec 10, 2015
Airworthiness date
Aug 29, 2014
Last FAA action
Jul 1, 2023
Registration expires
Dec 31, 2028
Mode S code (hex)
AA1E30
Aircraft category
Super-midsize jet
Weight class
Over 20,000lbs

From FAA registry data as of August 2026. Check the FAA registry for the current record.

OWNERSHIP

Registered owner

Global Automation Solutions Inc

Corporation · Marlborough, CT, US

ESTIMATED VALUE

What N751EM might be worth

No estimate on record

Value depends on total time, engine program, damage history and the completeness of the logbooks.

Open the aircraft value tool

EQUIPMENT AND HISTORY

As reported in public sources

Avionics
Honeywell Primus 2000 (standard on the type)

Listings and registries are not the logbooks. A pre-buy confirms equipment, program status and damage history from the records themselves.

RESEARCH NOTES

About N751EM

Compiled with AI assistance from the public sources listed below, August 2026. Not checked against the aircraft's logbooks.

Overview

Global Automation Solutions Inc, a corporation in Marlborough, CT, is the registered owner of N751EM. The airframe is a Cessna Citation X built in 2006, serial number 750-0254.

Registry dates

The FAA record shows a registration certificate issued on December 10, 2015, and an airworthiness date of August 29, 2014. CESSNA is listed as the make and 750 as the model, under FAA TCDS T00007WI (Cessna 750). The record does not flag fractional ownership.

The type

The Citation X is listed with a Mach figure of 0.92 and a maximum cruise speed of 525 knots true airspeed. Its ceiling is 51,000 feet, and its fuel capacity is 1,930 US gallons. The type's two Rolls-Royce AE3007C1 engines are rated at 6,764 lbf each. Up to 12 passengers are listed, and Honeywell Primus 2000 is the standard flight deck. The ICAO type designator is C750. BJT gives a trade-press range figure of 2,890 nautical miles with all passenger seats occupied, which is not a manufacturer figure. The Citation X is a super-midsize jet.

SOURCES

Where this page comes from

Built from FAA registry records, manufacturer specifications, and public flight-tracking and market data, compiled August 2026. Values come from Radar’s aircraft value model. Owners and operators can ask for a correction or removal.

BUYING, SELLING OR FINANCING

What to check before a deal